Home  |  About ANYI   |   Products   |   Service + Support   |   Testimonials   |   Expertise   |   Contact   |     
Standard Reference
     Artifacts
Precision Step Gauges
Swivel Support
Module masters
Gauge blocks
Slide Calipers
Digital Calipers
Dial Calipers
Vernier calipers
Digital Scale Units
Depth Gauges
Digital Depth Gauges
Dial Depth Gauges
Vernier Depth Gauges
Height Gauges
Digital Height Gauges
Dial Height Gauges
Vernier Height Gauges
Micrometers
Micrometer Heads
Outside Micrometers
Inside Micrometers
Depth Micrometers
Indicators
Thickness gauges
Indicators
Special Calipers
Special Designs
Accessories
Clinometers
Stands
Data Interfaces
Surface Plates
Others
You are here: Home >> 重庆市幸运农场走势图

Expertise

How to Read a dial Caliper

Dial caliper is a handy and versatile measuring tool. It can measure I.D, O.D, Step and depth. Parts of a dial caliper

Clean the measuring faces before and after measurement.Close the jaws and check that the indicator points to "0" on the dial face.If caliper doesn't zero, loosen the bezel clamp screw and rotate the bezel to the "0" position.Tighten the bezel clamp screw to fix the "0" position.

Dial graduation of .001" and .100" in one revolution for dial caliper of inch system.

Dial graduation of 0.02mm or 0.01mm and 2mm or 1mm in one revolution for dial caliper of metric system.

For example, a measurement of 15.43 millimetres would be obtained by reading 15mm on the main scale, and then adding 0.43mm as determined by the dial(as shown in the image).

Inch Dial calipers are read in a similar fashion.

Note: When using either a metric or inch dial caliper, smaller readings than those graduated may of course be obtained by visual interpolation between graduations.

 

[ << Back ]          

 
 
CopyRight © 2009 Anyi Instrument Co.,Ltd All Rights Reserved

利用互联网网络赚钱的 内蒙古时时彩专家杀号 电子游戏议论文700字 20元金孔雀刮刮乐 网球旋风动漫 pk10开奖网 rain急速赛车 窗帘二连码是啥 陕西快乐十分前三组技巧 神算子单双中特 红球ac值是什么意思 上海快三走势图分布图 二分彩是正规的吗 大乐透走势图带连线图彩宝贝 11旺线上娱乐